Fix a Leaking Exhaust Pipe with Some Simple DIYs for a Temporary Patch
Rust is a common issue with exhausts and results in cracks and holes in a car’s exhaust system. A leak anywhere in an exhaust system will cause loud noises. Moreover, damage in the exhaust system can result in toxic fumes leaking into the driver’s cabin. Now sometimes, repairing minor damages is easy to self-perform.
The most common problem in a car’s exhaust is a leaking tailpipe. Let’s look at some simple ways to fix a tailpipe leakage.
Ways to remedy a tailpipe leakage
An essential fact to remember is that the following ways are just temporary fixes. After applying them, you must take your car to a professional car garage for a permanent exhaust repair in Coventry.
I. Fixing a leak with stainless hose clamps
1. Materials required for this procedure includes a jack, a tin can, and hose clamps. Now using a heavy duty snip, cut through the can longitudinally till one end. Cut out the other end as well.
2. Use jacks and lift your car to make space for yourself to inspect the exhaust system properly. The best approach here is to put individual jack stands below each wheel, as this will ensure a stable condition.
3. Brush off any debris from the rusty tailpipe, so that they don’t hinder the seal of the can against your car’s exhaust pipe.
4. Place the can over your car’s exhaust pipe in a way that it seals over the leak. Additionally, you need to make sure that the tin can's cut edges overlap on each other to form a double layer over the hole.
5. Now take the hose clamps and unscrew them entirely so that they can be wrapped around the tin cans completely. Place all five clamps with equal spacing across the can’s length.
6. Tightly screw the clamps until they can no longer move.
II. Fixing an exhaust pipe leaks with putty or repair tapes
1. Small holes and leaks can be fixed easily by using epoxy and other patching mediums. Before doing the patchwork, it’s important to detect all leaks in the tailpipe. A useful way to do so is by keeping the engine in neutral. You must take the help of an assistant for this purpose. Keeping the engine running and inspecting the exhaust will allow you to identify the leaks accurately.
2. Turn off your car’s engine and let the exhaust cool down. Now scrub off all rust from your car’s tailpipe using a steel-toothed brush. Scrub away all rust from the entire portion around the leak.
3. Now use fine grit sandpaper to scrub the portion you need to repair. Sandpaper will remove all remaining pieces of dirt and will create tiny micro abrasions to allow epoxy or repair tapes to adhere to the surface firmly.
4. Use epoxy putty or a repair tape to patch the holes. Moreover, it’s useful to remember that some repair tapes will need a hot surface to bond with the surface while some many need wetting before application.
After applying the above temporary fixes, be sure to head over to a professional garage for a permanent exhaust repair. Moreover, a properly functional exhaust is crucial to pass your MOT test in Coventry. Visit Central Point MOT for a thorough exhaust repair service. Additionally, they perform MOT check and sell tyres of various types.
